- Description
- Specs
- Videos
Description
With the new ultra sharp and refined zirconium grain, the ENDURO-FLEX finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the ENDURO-FLEX disc can be restored to like-new performance by reducing the diameter of the ECO-TRIM backing.
Features
- One step finishing solution to reduce cost
- Quiet, vibration-free grinding
- Raised hub fits all standard grinder back flanges
- With integral thread 5/8"-11
- Eco-Trim™ trimmable backing extends disc life by up to 3 times
- Safe and easy to trim
Materials
- Steel, stainless steel
Applications
- Grinding and finishing welds
- Surface finishing
Tips
- Always use a back flange
- Backing can be trimmed for working in corners
Specifications
| Diameter | Arbor | Grit | Order No | Max RPM | Std Pkg | List Price | |
|---|---|---|---|---|---|---|---|
| 4-1/2 " | 7/8 " | 40 | 15-R 454 | 13,300 | 10 | 11.65 | |
| 4-1/2 " | 7/8 " | 60 | 15-R 456 | 13,300 | 10 | 11.65 | |
| 4-1/2 " | 7/8 " | 80 | 15-R 458 | 13,300 | 10 | 11.65 | |
| 4-1/2 " | 7/8 " | 120 | 15-R 462 | 13,300 | 10 | 11.65 | |
| 5 " | 7/8 " | 60 | 15-R 506 | 12,200 | 10 | 14.95 | |
| 5 " | 7/8 " | 80 | 15-R 508 | 12,200 | 10 | 14.95 | |
| 5 " | 7/8 " | 120 | 15-R 512 | 12,200 | 10 | 14.95 | |
| 6 " | 7/8 " | 40 | 15-R 604 | 10,200 | 10 | 18.55 | |
| 6 " | 7/8 " | 60 | 15-R 606 | 10,200 | 10 | 18.55 | |
| 6 " | 7/8 " | 80 | 15-R 608 | 10,200 | 10 | 18.55 | |
| 6 " | 7/8 " | 120 | 15-R 612 | 10,200 | 10 | 18.55 | |
| 7 " | 7/8 " | 40 | 15-R 704 | 8,600 | 10 | 23.75 | |
| 7 " | 7/8 " | 60 | 15-R 706 | 8,600 | 10 | 23.75 | |
| 7 " | 7/8 " | 80 | 15-R 708 | 8,600 | 10 | 23.75 | |
| 7 " | 7/8 " | 120 | 15-R 712 | 8,600 | 10 | 23.75 |
Videos
Customer Reviews
5.0 Based on 1 Reviews
Write a Review Ask a Question - Reviews
- Questions
Filter Reviews:
MN
09/08/2021
michael n.
United Statesgrinder and paint makes the welder i ain't
When stick welding stainless steel handrails using 316L 3/32 rods it's all in the finish. Goes without saying, your welding skills must perform as promised. When using a blending disc, a variable speed grinder on low speed performs best. Also only lightly drag. Do not push the grinder, this will dig into the stock. Give it a try and the results will please the eye. Don"t forget to label your stainless steel consumables. Carbon steel grinding wheels will transfer steel on to the stainless and rust stains will ruin your work.
